gyshen
Newbie level 1
- Joined
- Jan 15, 2013
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,288
I want to model the inductor saturation in LT SPICE, however, I do not know how to play the arbitrary inductor definition flux in my model. I have upload my model files, I hope anyone who know this can tell me how to model it.
The saturation inductor in my model is L5, I used a current control voltage source to get the current flow through the inductor, and the flux=94uH*5*tanh(V(IND_I)*(1/5)), However, I found the results are not right, I think I made some mistakes to define the inductor, Could anyone tell me what I can do to fix this design? Thanks!
Guangyao
The saturation inductor in my model is L5, I used a current control voltage source to get the current flow through the inductor, and the flux=94uH*5*tanh(V(IND_I)*(1/5)), However, I found the results are not right, I think I made some mistakes to define the inductor, Could anyone tell me what I can do to fix this design? Thanks!
Guangyao