devismaster
Newbie level 1
- Joined
- Aug 8, 2013
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 6
I need to switch on and off the usb D+ and D- lines via the GPIO of a Raspberry Pi and I used 74HC4066. Unfortunately this IC is breaking the USB signal and it is not stable at all - constantly disconnecting or hanging. I have attached a high speed USB 2.0 device. Probably I need a suggestion for a faster analog switch or any other advice for simple solution is greatly appreciated.