USB and microcontroller interface

Status
Not open for further replies.
R

rememberramu

Newbie level 3
Joined
Jun 24, 2009
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,324
For my project I have to interface mobile with microcontroller, the mobile only have USB out (actually data cable have mini USB and USB on either side). So I am searching for microcontroller which have direct USB input.

which microcontroller accepts data from USB and where can I get it ?
 

The PIC18F4550 has USB.

Slorn
--
Dwengo... gets you started with microcontrollers!
 

Don't get confused, you can only connect a host to a device.

If you have two devices they cannot be connnected together.

The phone is a device and the PIC18F4550 is a device as well.

You need to get a microcontroller with a USB host and this can be connected to the phone.
 

FTDI's VNC1L adds host capability to MCU
 

have a look on USB On-The-Go (OTG), I think PIC18F4550 support OTG which can make a communication between two USB devices.
 

No PIC18F4550 doesn't have USB OTG. I found that Atmel AVR USB1287 and PIC24FJ32GB004 supports USB OTG. Have you ever used it ?
What is your experience ?
 

Do you mean my experience or the author experience?
SL11H embedded host from cypress.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…