Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

UP-controlled soldering station

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


In this project, the most mistakes from common ideas for a soldering station are improved. A button momentary switch to control the station was added. Without this addition, the PCB automatically becomes twice bigger. The whole system is divided in two plates: a driver with display and the executive system. A soldering iron from the PT-803 soldering station was incorporated.
Files of Eagle program are attached below. Everything is packed with rar.



Link to original thread - Stacja lutownicza sterowana uP
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top