Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Unpolar to bipolar conversion

Status
Not open for further replies.

ombalone

Newbie level 1
Newbie level 1
Joined
Feb 3, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Bangalore
Activity points
1,290
I have a unipolar DAC which gives only +ve o/p.

i want it should be bipolar varies dynamically with the given i/p.

i want a single ckt at the o/p of DAC that will handle the conversion of

Unipolar to bipolar, please suggest me the ckt that will done conversion.


om
 

What do you mean by "ckt"?

The easiest way to solve is to use a simple opamp adder circuit and add a negative voltage.
 

connect a capacitor in the o/p of DAC.

you will get bot + and - excursion.

srizbf
3rdjuly2010
 

use a clamping circuit to change the dynamic span of the output from +ve only to the range you want.
 

Hi,
These "simple circuit" called over long years and long too in our future: "second OP" with gain of 2 :)....
Check pls. the LT Application, but its a well knowed circuit technik from all DAC vendors.
K.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top