Reply to thread

Hello,I have used a voltage source as shown below ,So although I have a pulse on the input , the voltage on the output is almost zero,but the current is continues.

How can I see the V=L*di/dT in action here?

I have a current rise of 1mA inductance of 1uH T=1nsec but Vout=629mV however according to calculation Vout  needs to be 1V.

Two questions:

1.why My vout doesnt fit the calculation?

2.Why do I get these small spike in the voltage on the inductor?

Thanks.

[ATTACH=full]198619[/ATTACH]

[ATTACH=full]198618[/ATTACH]

[ATTACH=full]198617[/ATTACH][ATTACH=full]198616[/ATTACH]