[SOLVED] Undeclared Identifier 'USB_Interrupt_Proc' - HELP

unsigned char Read_Buffer[16] absolute 0x500;
unsigned char Write_Buffer[16]absolute 0x510;
unsigned char num,flag;




void interrupt()
{
 USB_Interrupt_Proc();
 TMR0L = 100;             //Reload Value
 INTCON.TMR0IF = 0;       //Re-Enable Timer-0 Interrupt
}

//LCD 8-bit Mode Connection
sbit LCD8_RS at RC1_bit;
sbit LCD8_RW at RC0_bit;
sbit LCD8_EN at RC2_bit;
sbit LCD8_D7 at RD7_bit;
sbit LCD8_D6 at RD6_bit;
sbit LCD8_D5 at RD5_bit;
sbit LCD8_D4 at RD4_bit;
sbit LCD8_D3 at RD3_bit;
sbit LCD8_D2 at RD2_bit;
sbit LCD8_D1 at RD1_bit;
sbit LCD8_D0 at RD0_bit;

sbit LCD8_RS_Direction at TRISC1_bit;
sbit LCD8_RW_Direction at TRISC0_bit;
sbit LCD8_EN_Direction at TRISC2_bit;
sbit LCD8_D7_Direction at TRISD7_bit;
sbit LCD8_D6_Direction at TRISD6_bit;
sbit LCD8_D5_Direction at TRISD5_bit;
sbit LCD8_D4_Direction at TRISD4_bit;
sbit LCD8_D3_Direction at TRISD3_bit;
sbit LCD8_D2_Direction at TRISD2_bit;
sbit LCD8_D1_Direction at TRISD1_bit;
sbit LCD8_D0_Direction at TRISD0_bit;
// End Lcd8 module connections

char i;                              // Loop variable

void UART1_Write_Text_Newline(unsigned char msg[])
{
 UART1_Write_Text(msg);
 UART1_Write(10);
 UART1_Write(13);
}

void clear_buffer(unsigned char buffer[])
{
 unsigned int i = 0;
 while(buffer[i] != '\0')
 {
  buffer[i] = '\0';
  i++;
 }
}

//
void main()
{

  UART1_Init(9600);
  Delay_ms(100);
  UART1_Write_Text("USB Test Program");

  ADCON1 |= 0x0F;                    // Configure AN pins as digital
  CMCON  |= 7;                       // Disable comparators
  TRISB = 0x00;
  TRISC = 0x80;
  Lcd8_Init();                       // Initialize Lcd8
  Delay_ms(100);
  Lcd8_Cmd(_LCD_CLEAR);              // Clear display
  Delay_ms(100);
  Lcd8_Cmd(_LCD_CURSOR_OFF);         // Cursor off
  Delay_ms(100);

  Lcd8_Out(1,3,"PIC18F4550");                // Write text in first row
  Delay_ms(100);
  Lcd8_Out(2,3,"USB Example!");                // Write text in second row
  Delay_ms(2000);
  INTCON = 0;
  INTCON2 = 0xF5;
  INTCON3 = 0xC0;
  RCON.IPEN = 0;
  PIE1 = 0;
  PIE2 = 0;
  PIR1 = 0;
  PIR2 = 0;
  //
  // Configure TIMER 0 for 3.3ms interrupts. Set prescaler to 256
  // and load TMR0L to 100 so that the time interval for timer
  // interrupts at 48MHz is 256.(256-100).0.083 = 3.3ms
  //
  // The timer is in 8-bit mode by default
   T0CON = 0x47; // Prescaler = 256
   TMR0L = 100; // Timer count is 256-156 = 100
   INTCON.TMR0IE = 1; // Enable T0IE
   T0CON.TMR0ON = 1; // Turn Timer 0 ON
   INTCON = 0xE0; // Enable interrupts
   //
 // Enable USB port
 //

 UART1_Write(10);
 UART1_Write(13);
 UART1_Write_Text_Newline("Data is Ready to be Received from the PC");

 Hid_Enable(&Read_Buffer,&Write_Buffer);
 Delay_ms(2000);

 // Read from the USB port. Number of bytes read is in num
  start:
  while(Hid_Read() == 0);    //Stay Here if Data is Not Coming from Serial Port
  //If Some Data is Coming then move forward and check whether the keyword start is coming or not
  if(strncmp(Read_Buffer,"S",1) == 0)
  {
  Lcd8_Cmd(_LCD_CLEAR);
  Lcd8_Out(1,2,"Authentication");
  Lcd8_Out(2,8,"OK");
  goto loop;
  }
  else
 {
  Lcd8_Cmd(_LCD_CLEAR);
  Lcd8_Out(1,2,"Authentication");
  Lcd8_Out(2,5,"Fails!");
  goto start;
 }
 loop:

  //Now Authentication is Successfull Lets Try Something else
  //Lets Display the Data Coming from the USB HID Port to the LCD
   Delay_ms(1000);
   Lcd8_Cmd(_LCD_CLEAR);
   Lcd8_Out(1,1,"Received Data:-");
   flag = 0;

 loop_second:
 clear_buffer(Read_Buffer);
 while(Hid_Read() == 0)
 {
  if(flag == 0)
  {
   Lcd8_Out(2,1,"No Data");
   flag = 1;
  }
 }
 Lcd8_Cmd(_LCD_CLEAR);
 Lcd8_Out(1,1,"Received Data:-");
 Lcd8_Out(2,1,Read_Buffer);
 goto loop_second;
 Delay_ms(1000);
 Hid_Disable();
 Lcd8_Out(1,1,"HID DISABLE");
}