Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Unable to program my avr microcontroller

Status
Not open for further replies.
A

adityaheroes

Newbie level 2
Newbie level 2
Joined
Jan 26, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
Hi! i am unable to program my atmega64L even after checking and verifying all the SPI connections. I use codevisionAVR for programming and sinaprog and khazama for loading the program. The serial programmer which i use is able to program my ATmega32 without any error but as soon as i try programming atmega64.. it just doesn't. The error i get is initialization failed and rc = -1 etc., Can anyone help me? :cry:Ineed a solution asap as i am running out of time. Thank you.
 

If anything apart from the programmer connected to MISO, MOSI, SCK ?

Can it be a clocking problem , try reducing the ISP speed of the programmer if possible
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top