binod_kumar
Newbie level 5
- Joined
- Sep 15, 2015
- Messages
- 9
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 85
hi,
I am facing difficulty with the ET tool ( in gui format) while using build_model .I am giving gate level netlist (in .v format) in the designsource field and OSU Cell library in techlib field . the tool is throwing error that
where DFF_0 is the first D flipflop it encounters while parsing the supplied gate level netlist(.v file.) I have used all variants of the OSU standard cell library but they give same error.
I observed that it is able to understand the basic gates like or, and etc. Hence I am understanding that it is not able to map "dff" in the supplied gatelevel netlist(.v file) to any of the DFF descriptions available in the standard cell library.
How it can be corrected?
Kindly help.
Thanks In advance.
I am facing difficulty with the ET tool ( in gui format) while using build_model .I am giving gate level netlist (in .v format) in the designsource field and OSU Cell library in techlib field . the tool is throwing error that
Code:
1 ERROR (TEI-002): The 'cell dff' was not found in the design source file(s) specified. Missing cell instance name: DFF_0where DFF_0 is the first D flipflop it encounters while parsing the supplied gate level netlist(.v file.) I have used all variants of the OSU standard cell library but they give same error.
I observed that it is able to understand the basic gates like or, and etc. Hence I am understanding that it is not able to map "dff" in the supplied gatelevel netlist(.v file) to any of the DFF descriptions available in the standard cell library.
How it can be corrected?
Kindly help.
Thanks In advance.