UK Rugby Clock Signal Overriding....

Status
Not open for further replies.

ron

Junior Member level 3
Joined
Dec 24, 2001
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
173
Hi All,
I'm interested in trying to override the Rugby clock time transmission over a very small range (approx. 10 metres). Anyone know if this is possible at all, or has anyone actually experimented with this signal.
The actual digital part of the signal is no problem, but the RF/Antenna part of the transmitter is stumping me due to it being such a low frequency carrier.
Any advice appreciated.

Thanks
Ron.
 

You are in the near field at 10 m and an ordinary LC tuned circuit will work with the inductor having a large diameter. Try an experiment with a signal generator. See if connecting it to different antenna types you experiment with keeps a receiver clock from locking on. You may have to remove the batteries and replace them to make the clock try to reacquire.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…