abhinand rd
Member level 1
- Joined
- Jul 15, 2011
- Messages
- 32
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- bangalore
- Activity points
- 1,516
Hello,
I am having problems testing UCC28950 IC.
I am testing this IC's functionalities without the true signals from the power circuit.
the problem is i am not able to vary the duty cycle of the PWM outputs by varying the feedback pin voltage.
More closely, i am not able to obtain Error amplifier output(COMP) when the feedback signal(EA-) is varied.
I need some help/inputs on this.. Pls ask if any more details are required
Thanks
I am having problems testing UCC28950 IC.
I am testing this IC's functionalities without the true signals from the power circuit.
the problem is i am not able to vary the duty cycle of the PWM outputs by varying the feedback pin voltage.
More closely, i am not able to obtain Error amplifier output(COMP) when the feedback signal(EA-) is varied.
I need some help/inputs on this.. Pls ask if any more details are required
Thanks