Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Uart from MicroBlaze to zynq

J

JustMet

Newbie
Newbie level 1
Joined
Oct 9, 2024
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
16
Hello Community Members,
I have created a TMR Microblaze system and connected the output UART to the Tx and Rx pin using the MIO option on Zynq+ When I generate a bit file and add an associated elf file to it, I cannot see the option to program the Zynq processor and therefore I cannot see the output of the Microblaze using the putty terminal using a serial connection.
Screenshot 2024-10-09 012924.png


Best regards
JustMet
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top