TSOP2 / FBGA48 to DIP48 adapter EAGLE

Status
Not open for further replies.
F

fjpompeo

Advanced Member level 1
Joined
Nov 29, 2003
Messages
416
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
Brazil
Visit site
Activity points
3,053
Dear collegues,

I need an Eagle project with schematics and PCB with three footprints one FBGA48, one TSOP2-48 and one DIP48. All pin conections all make, so just don't know to put these parts in the same schematic / pcb using Eagle 7.7.0.

P.S. All pins must be present em free for conection between componentes.
Attached you will find a ready PCB locking very close the one I need.

Best regards.

Fernando J. Pompeo - Call sign PU2PLL
 

Attachments

  • SSOP28 to DIP28 adapter.jpeg
    97.4 KB · Views: 178

Sort by date Sort by votes
Hi,

**
If you want someone else do this job then: post it in the EDA jobs section and consider to pay for the job.

If you want to do it on your own: Show us what you did so far and where the exact problem is.

Klaus
 

Upvote 0 Downvote
Thank you for you reply. I made a project with both FBGA and EDIP36 packages with all necessary conections but when I run autorouter it doesn't reach 100% only max 48%, what do I'm doing wrong?
 

Attachments

  • Adapter FBGA to EDIP36-PU2PLL.zip
    18.1 KB · Views: 199

Upvote 0 Downvote
Hi,

I don´t see any routing at all.
No autorouter setup, no DRC setup, also TSOP-2 is missing.
So I don´t see what you did, nor what is wrong.

I guess it´s an DRC setup problem.

Klaus
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…