ckskarulai
Newbie level 1
- Joined
- Nov 18, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 7
Hai..
I am using the below circuit for one of my application. For the resistive load it is working properly. But my loads are capacitive loads(SMPS) around 20W to 40W. When I try to ON the first load, Sometimes load 2 gets on for a short time. I Thought it may due to the gate noise. So I removed the 39 Ohm resistor to the gate but still the problem comes. That means even the gate is open, triac get triggered. I put some snubber circuit and all but no use. Please help me.....
I am using the below circuit for one of my application. For the resistive load it is working properly. But my loads are capacitive loads(SMPS) around 20W to 40W. When I try to ON the first load, Sometimes load 2 gets on for a short time. I Thought it may due to the gate noise. So I removed the 39 Ohm resistor to the gate but still the problem comes. That means even the gate is open, triac get triggered. I put some snubber circuit and all but no use. Please help me.....