Prince Vegeta
Member level 5
- Joined
- May 29, 2012
- Messages
- 84
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 2,011
hi...
^
I want to have 2 AC sources in an ATS project and I made the isolation using MOC3031M chip like the picture.
my questios:
1- Is this circuit valid to use? I will program a PIC MCU to trigger the triac drivers one at a time (the battery and the switch here is just to try the circuit).
2- If I made the circuit like in the picture, will there be any leakage current from the active source to the other one or so (in case of short circuit, i.e, one source had error and become short circuit... just in case???)???
I hope u answer my 2 questions.
thank you all.
^
I want to have 2 AC sources in an ATS project and I made the isolation using MOC3031M chip like the picture.
my questios:
1- Is this circuit valid to use? I will program a PIC MCU to trigger the triac drivers one at a time (the battery and the switch here is just to try the circuit).
2- If I made the circuit like in the picture, will there be any leakage current from the active source to the other one or so (in case of short circuit, i.e, one source had error and become short circuit... just in case???)???
I hope u answer my 2 questions.
thank you all.