Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Transmit the signals RS422 over ethernet Network

Status
Not open for further replies.
kkdelabaca

kkdelabaca

Full Member level 2
Full Member level 2
Joined
Apr 18, 2003
Messages
140
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
1,105
Hi!

What I need to transmit and receive the RS422 signals through the ethernet network? Exist one specific IC?

Thanks!
 

Hi,

The RS422 and Ethernet (I assume this is 10/100Mbps) interfaces are completely different from the physical electrical characteristics. Are u looking to do a physical media translation between these two interface types? If so, you may be able to build a discrete circuit with an RS422 on one end and a simple PLD in between with the Ethernet PHY on the other end.

Cheers,
snowfall
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top