Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Transistors stage amplifier

Status
Not open for further replies.
B

BlackMamba

Guest
Newbie level 1


Project by bocian90
Source here

It is my first amplifier. It is based on power end stage by Janek11398. At the current stage there are 6 2N3773 transistors. Power supply voltage is +63V, that’s why amplifier reaches 300W on 4 ohm load. Indicator is copied from polkat forte 101s.
I apply forced air circulation.
Starting procedure was described in Wzmacniacz estradowy na tranzystorach


 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top