InvokeMeWell
Junior Member level 3
Hello all,
I have copied an simple inverter with verilogA here is the code and I added the white noise line only:
code for inverter
with the PNoise agrees with white Noise I have put in my code but the transient Noise is totally off
Transient nosie setup
my clock is 48.0MHz, I let it run for 1ms, transient conservative, noise fmax = 80.0G, I runned 5 transient noise with different seed
PN(clip(VT("/test") 100n 0.999m) "rising" 0.5 ?Tnom 20.833n ?windowName "Blackman" ?smooth 1 ?windowSize 8192 ?detrending "Linear" ?cohGain 1 ?methodType "absJitter")
I tried also with the window size 2497166, but the transient noise was something crazy
I have copied an simple inverter with verilogA here is the code and I added the white noise line only:
code for inverterwith the PNoise agrees with white Noise I have put in my code but the transient Noise is totally off
Transient nosie setup
my clock is 48.0MHz, I let it run for 1ms, transient conservative, noise fmax = 80.0G, I runned 5 transient noise with different seed
PN(clip(VT("/test") 100n 0.999m) "rising" 0.5 ?Tnom 20.833n ?windowName "Blackman" ?smooth 1 ?windowSize 8192 ?detrending "Linear" ?cohGain 1 ?methodType "absJitter")
I tried also with the window size 2497166, but the transient noise was something crazy
