Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

transient and ac analysis on cadence virtuoso

Status
Not open for further replies.
T

Tanvi Singh

Newbie level 4
Newbie level 4
Joined
Jun 10, 2015
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
47
hello

I am simulating low noise transconductance amplifier circuit in cadence virtuoso and for the transient analysis I am getting the output current as 10 microampere when the input is fed at 2.4GHz and when ac analysis is done then the output at 2.4Ghz is showing as 10.339 mA.I could not understand the concept. Can anyone suggest.

Many Thanks
 

Are input signal amplitudes in both simulations the same?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top