mrknownothing
Newbie level 4
Hi,
I have a simple schematic as shown below:
From the simulation I expected 10mA to flow in the secondary and that is what I get. The primary and secondary peak voltages are 1V. For the primary current I thought the current would be given by the impedance of L1 in parallel with a conjugate impedance of C1. So that should give me at 10KHz 62.83 ohms in parallel with 100 ohms. So I was expecting a current of around 25mA but I am getting 5.88mA.
What am I missing here?
I have a simple schematic as shown below:
From the simulation I expected 10mA to flow in the secondary and that is what I get. The primary and secondary peak voltages are 1V. For the primary current I thought the current would be given by the impedance of L1 in parallel with a conjugate impedance of C1. So that should give me at 10KHz 62.83 ohms in parallel with 100 ohms. So I was expecting a current of around 25mA but I am getting 5.88mA.
What am I missing here?