Transformer impedances

[mrknownothing]

Hi,
I have a simple schematic as shown below:



From the simulation I expected 10mA to flow in the secondary and that is what I get. The primary and secondary peak voltages are 1V. For the primary current I thought the current would be given by the impedance of L1 in parallel with a conjugate impedance of C1. So that should give me at 10KHz 62.83 ohms in parallel with 100 ohms. So I was expecting a current of around 25mA but I am getting 5.88mA.

What am I missing here?

 

[FvM]

What am I missing here?

The opposite phase of capacitive and inductive load. The currents don't add, they substract.

 

[mrknownothing]

Thank you!