Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

transfer function of oscillator (RC, LC, Ring etc.)

Status
Not open for further replies.

chinito

Full Member level 2
Full Member level 2
Joined
Jul 5, 2004
Messages
128
Helped
11
Reputation
22
Reaction score
6
Trophy points
1,298
Activity points
1,204
lc transfer function

Can somebody point me to a source that'll show how to calculate open loop transfer function of oscillators (LC, RC, Ring etc.). thanks.
 

transfer function of oscillator

In terms of transfer function it does not matter what kind of cirdcuit is.

C= 1/sC
L=sL

If you will go and perform transfer function in AC analysis is better to assume zero initial conditions and perform Laplace transform (convert it) for each circuit element.
 

transfer function of lc

You could break open the loop and perform an AC analysis at
one end of the loop, looking for the response at the other end.

Also helpful would a pole-zero analysis in Spectre or Hspice,
from which you can interpret the transfer function.

--Radigital
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top