Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

To learn and master EMC design issue completely ?

Status
Not open for further replies.
S

seyyah

Advanced Member level 2
Advanced Member level 2
Joined
Oct 7, 2001
Messages
646
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Activity points
6,234
What is the real source to learn and master EMC subject? Directives? or Books? or Application notes and papers? Which is/are the main source(s)? And what do you offer?
 

Hi

I feel working with it is a better source source to learn and master EMC subject.

I have gone through directives, books, application notes, but until and unless you start working on them, you are not going to get anything into your brain - this is what I could understand............
 

its just by experience
by books u can have the idea
but all the problems whihc comes in EMC are tricky which have a similar tricky solution which cannot be know by books
kepp working and testing the borads ...........and u r expert

thnx
som
 

Only practice will ake u master in EMC.Sudy signal intigrity isssus.It will help u

Jumper
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top