TLV1811 comparator setting into push pull mode

[yefj]

Hello,I have the following TLV1811 component which is used as comparator.
In the datasheet on the headline they say it could be push pull or open drain output.
If the TLV1811 will be set as open drain then ill have to put pullup resistors.
How can I know that my TLV1811 is pushpull?
Thanks.

https://www.mouser.com/ProductDetail/Texas-Instruments/TLV1811LDBVR?qs=rQFj71Wb1eX09MzTfpxERg==
https://www.ti.com/lit/ds/symlink/t...=https%3A%2F%2Fwww.ti.com%2Fproduct%2FTLV1811

 

[FvM]

First datasheet lines are answering your question

• Open-drain output option (TLV182x)
• Push-pull output option (TLV181x)

 

[stenzer]

BR

 

[yefj]

Hello, When I want to choose TLV1811 component I have difference of the last letters in the name.
I have DCKR and DBVR.
What is the difference between them regarding footprint sctructure?
Thanks.
In the data sheet they say DBV and DCK are the same footrpint but they dont mention the last letter "R"

 

[FvM]

"R" stands for reel and is a shipping option, not a different component package.

 

[betwixt]

DVBR = SOT23
DCKR = SC70

Brian.

 

[yefj]

Hello Brian so I choose TLV1811DBVR as shown bellow in the datasheet and ALTIUM library symbol the pin order of the the symbol is wrong.
Pin 2 is output and Pin 5 is V+.
so there is an error here and i need to fix the symbol?
Thanks.

https://componentsearchengine.com/part-view/TLV1811DBVR/Texas%20Instruments

 

[FvM]

Pin 2 is output and Pin 5 is V+.

Where do you see output at pin 2?
The shown schematic symbol is apparently showing TLV18x1L type with reversed supply, output still at pin 1.

I would b.t.w. suggest larger SOT23-5 (DBV) unless you love soldering under microscope.