patan.gova
Full Member level 3
- Joined
- Dec 19, 2011
- Messages
- 172
- Helped
- 4
- Reputation
- 8
- Reaction score
- 0
- Trophy points
- 1,296
- Activity points
- 2,776
Hello,
I am first time planning to use a DAQ to acquire the analog signal as shown in the image https://imageshack.us/photo/my-images/842/6frf.jpg/ and want to take samples in a period of a second to check how many peaks are present in this time interval.But quite confused with the timing setting in the DAQ assiatance like what the generation mode,samples to write,rate represent and what are the values I need to use to get a samples in a time interval of second where the post process of finding the peaks will be done from thses samples from the image shown above.
Thanks in Advance.
I am first time planning to use a DAQ to acquire the analog signal as shown in the image https://imageshack.us/photo/my-images/842/6frf.jpg/ and want to take samples in a period of a second to check how many peaks are present in this time interval.But quite confused with the timing setting in the DAQ assiatance like what the generation mode,samples to write,rate represent and what are the values I need to use to get a samples in a time interval of second where the post process of finding the peaks will be done from thses samples from the image shown above.
Thanks in Advance.