Three-way freestanding columns based on Beyma speakers

Status
Not open for further replies.
B

BlackMamba

Guest


Project by daro6000
Source here

Columns described are three-way floor-standing based on Beyma speakers. Case is MDF burred with elm burr.
Column height is 1.3 m; weight 50 kg, capacity 100 liters.
Parameters:
- range: 25-20000 Hz
- efficiency 94dB AT 1 W/m
- impedance 6 Ohm
Speakers have poured bins and very strong magnets.
Frequency separation is 6 dB/octave. Division points are 200 Hz and 6000 Hz.
Case is not closed type, there is bass-reflex applied with opening radiating towards the bottom at the front and rear over the stand.
Speakers type:
-low range - 12 BR 70
- mid-range - 6 Mi 90
- high-range - T 2030
Case capacity: 90 liter net for low-range.

Frequency separator was calculated by WinISD. I adopt empty spaces between speakers. Frequency bands overlap so characteristics is satisfactorily linear.Efficiency drop for the low-range speaker starts at 120 Hz

 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…