vishalkatba
Newbie level 6
- Joined
- Sep 18, 2006
- Messages
- 14
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,283
- Activity points
- 1,399
1) if any of timing arc of any cell is disable so logicaly my clock tree should be reported after that arc.
2) there is a latch in my design. so the clock pin of that latch shoud be reported as a endpoint of clock tree or not ?
3)output port should be reported as an endpoint of clock tree or not?
2) there is a latch in my design. so the clock pin of that latch shoud be reported as a endpoint of clock tree or not ?
3)output port should be reported as an endpoint of clock tree or not?