Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Three phase motor control in microc with PIC16F877A using TRIAC

Status
Not open for further replies.
J

jean12

Advanced Member level 2
Advanced Member level 2
Joined
Aug 27, 2013
Messages
529
Helped
5
Reputation
12
Reaction score
6
Trophy points
18
Activity points
5,497
Hello,I would like to control a three phase motor respecting phase order,could you advise on how I can do it,for zero crossing detection I used an operational amplifier as a comparator for detecting the zero crossing level,and I also I want to start from a low speed which could be increased with a push button,I planned to use the TRIAC BTA26-600 for doing so,could you please help?

The motor has a power of 11KW

Thank you!!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top