The problem of installation of cadence ic50 in redhat9.0

[hennry]

I'm a novice in linux,and I meet problem that I cannt handle it.The installation process and the problem detail is:

[[root@localhost root]# sh /mnt/d/setup.sh
Copyright 1985-1999 by Cadence Design Systems Inc.
LICENSED SOFTWARE - REVERSE ASSEMBLY, REVERSE COMPILATION AND
REVERSE ENGINEERING PROHIBITED. The information contained in
this package is the proprietary property of Cadence Design Systems,
Inc., or its licensors, and may only be used in accordance with
the Cadence Design Systems license agreement under which this
package is provided.
Restricted Rights Notice to Government Users
Use duplication or disclosure by the Government is subject to
the restrictions as set forth in subparagraphs (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013. Unpublished - all rights reserved under the
copyright laws of the United States.
Cadence Design Systems, Inc.
555 River Oaks Parkway
San Jose, California 95134 USA
Located CDROM at /mnt/d
\c

Specify path of install directory \c
[OR type [RETURN] to exit]: \c
/tools

Setting up softload for lnx86 in /tools
\c

SoftLoad has been successfully setup in the directory:\c

/tools\c

\c

You can install or update products by running:\c

/tools/install/bin.lnx86/softload\c


Do you want to start softload? [y/n]: \c
y


Starting up SoftLoad in GUI mode \c


DISPLAY environment variable is set to :0.0\c


If you do not see the SoftLoad console \c

window or the SoftLoad ASCII menu and\c

/mnt/d/setup.sh seems to be hanging then kill this \c

process.\c


Set your DISPLAY environment variable to a proper\c

value and manually start SoftLoad by typing: \c

/tools/install/bin.lnx86/softload


\c

Warning: Software administration should not be done as root
because it could cause file permissions problems while
extracting software
Press [Return] to proceed, q to quit :
WELCOME TO THE

CADENCE INSTALLATION UTILITY,

SOFTLOAD 6.0

Copyright (c) 1996-1998 Cadence Design Systems, Inc. All Rights
Reserved. Unpublished -- rights reserved under the copyright laws
of the United States.
Copyright (c) 1996-1998 UNIX Systems Laboratories, Inc. Reproduced
with Permission.

THIS SOFTWARE AND ON-LINE DOCUMENTATION CONTAIN CONFIDENTIAL INFORMATION
AND TRADE SECRETS OF CADENCE DESIGN SYSTEMS, INC. USE, DISCLOSURE, OR
REPRODUCTION IS PROHIBITED WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF
CADENCE DESIGN SYSTEMS, INC.

RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of Commercial Computer Software -- Restricted
Rights at 48 CFR 52.227-19, as applicable.







-------------------MAIN MENU----------------------


The available options are:


1) Load Available Products

2) List Installed Products

3) Remove Installed Products

4) (unavailable option) Configure Installed Products

5) (unavailable option) Test Installed Products

6) Update Installed Products

h) Help

q) Quit


Type your choice: [ 1 ]




CD#1 of the media set being used is required.

You must now identify where the CD-ROM is mounted.

1) Local (mounted to this machine)
2) Remote (mounted to another machine)

m) Main Menu
h) Help


Type your choice: [ 1 ]

Specify the CD-ROM mount point

1) /cdrom
2) Other

m) Main Menu
p) Previous Menu
h) Help


Type your choice: [ 2 ]
Type the CD-ROM mount point: [ /mnt/d ]

tar: This does not look like a tar archive
tar: Skipping to next header
tar: Archive contains obsolescent base-64 headers
tar: Error exit delayed from previous errors
/tools/install/bin.lnx86/softload: line 1412:
Could not extract information from FS.0 of CD#1.
Could not get platform or release information: command not found

can anybody save me?

 

[sulifen]

Bad News!
The IC5.0 cannot be installed in Redhat Linux 9.0!!
But you can install it in Redhat 7.2/8.0, then tar the installed directory and untar it in Redhat 9.0.
Try that, I've done and works fine in Redhat 9.0.

 

[sunking]

Re: The problem of installation of cadence ic50 in redhat9.

Please refer to

 

[wildwood]

Re: The problem of installation of cadence ic50 in redhat9.

hello , hennry , i am now trying to install IC50 on rh9 , and I met with exactly

the same problem as you. I just did it in the instructions as said in the

h**p:// , and still ,i can't fix it ,

when i sh ./softload , the same thing happend again .

would you plz tell me ,how do you fix the problem ?

thanks a lot in advance .

my email is : sdu_general@hotmail.com

 

[joelam]

Re: The problem of installation of cadence ic50 in redhat9.

I met with exactly

the same problem as you.

Added after 3 minutes:

How to fix this problem?pls help,thx!

 

[asmjager]

Re: The problem of installation of cadence ic50 in redhat9.

Hello

I'm using RedHat 9 (2.4.20) and IC5033 installs well. I dont know what I've did. I simply start to install.
I've an "emulized" version of package, but is the normal one. Look in that program for "thedock" ... good luck.

By change anyone have a license to AMS Design kit or hit kit ?


Best regards,

Asmjager

Attached some install instruction


-Copy your CDs to your home directory (xxx) /home/xxx/CadenceInstall/ your cds
-Delete the previous Cadence folder if it exists:
> rm -fr /Cadence
-Go into the following directory: /home/xxxx/CadenceInstall/IC5033/ISR200406181244/CDROM1/
>cd /home/xxxx/CadenceInstall/IC5033/ISR200406181244/CDROM1/
-Execute the installation script from this directory (be carefull with the capitals):
> ./SETUP.SH
-Specify path of install directory [OR type [RETURN] to exit]:
> /Cadence
-Directory /Cadence does not exist. Create? [y/n]:
> y
-Do you want to start softload? [y/n]:
> y
-Warning: Software administration should not be done as root because it could cause file permissi
ons problems while extracting software Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-The available options are:
> 1 (Load Available Products)
-You must now identify where the CD-ROM is mounted:
> 1 (Local (mounted to this machine))
-Specify the CD-ROM mount point:
> 2 (Other)
-Type the CD-ROM mount point: [ /home/xxxx/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/ISR200
406181244/CDROM1 ]
> (just press RETURN to accept to continue: the path should be correct at t
his point)
-Do you want to view the README file? Please press y (yes) or n (no) :
> y
-Follow the standard Cadence installation instructions. Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-Where is the installation information?
> 4 (Cadence Catalog)
-311:Unknown Product Name Removed from QSR. Press [RETURN] to continue:
> (just press RETURN to accept to continue)
-Go to the end of the products list by pressing the SPACE BAR
-Type your choice (a,n,p,1-3,2 5 9 ...):
> a (All of the above)
-Go to the end of the list of the selected products by pressing the SPACE BAR
-Are your selections correct? [y/n]
> y
-Disk checks successful. The following products will be installed or updated. Just press SPACE BAR to
continue.
-The following media is required:
IC5033 lnx86 P/N 356-70352-0301 CDROM # 1
IC5033 lnx86 P/N 356-70352-0302 CDROM # 2
IC5033 lnx86 P/N 356-70352-0303 CDROM # 3
IC5033 lnx86 ISR 200406181244 CDROM # 1
IC5033 lnx86 ISR 200406181244 CDROM # 2
IC5033 lnx86 ISR 200406181244 CDROM # 3
Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-Wait until the next CDROM is asked for (~7 minutes)
-Your package selections require IC5033 lnx86 P/N 356-70352-0301 CDROM # 1.
> 4 (Change CD-ROM mount point.)
-You must now identify where the CD-ROM is mounted.
> 1 (Local (mounted to this machine))
-Specify the CD-ROM mount point
> 2 (Other)
-Type the CD-ROM mount point: [ /home/xxxx/CadenceInstall/IC5033/ISR200406181244/CDROM1 ]
> /home/thedock/CadenceInstall/IC5033/Base/CDROM1
-CDROM # 2 and CDROM # 3 will be loaded automaticaly. There is nothing to do, just wait.
-Verify your installation. The available options are:
> 2 (List Installed Products)
-Specify the operating system
> 3 (lnx86)
-Now you can quit the Cadence IC 5.0.33 installation and begin the Aptivia installation. The available
options are:
> q (Quit)

 

[gerryhsu]

Re: The problem of installation of cadence ic50 in redhat9.

Follow the spec. IC500 only work with RD7.2/RH7.3

 

[uncle_urfi]

Re: The problem of installation of cadence ic50 in redhat9.

IC5033 installs/works under EL3.0 (minus the A Artist or is it just me?)

IC5033 installs/works under FC2 and FC3 (minus the A Artist or again ....)

For the above, export LD_ASSUME_KERNEL=2.4.1 is needed before installation begins, and export CDS_Netlisting_Mode=Analog is needed afterwards to maintain sanity.

and it also works fine under Mandrake 9.2

All this info is already available on previous posts.

You may have a corrupt archive. Try installing from the HD and not from the disc as suggested by another user earlier.

 

[unicum]

Re: The problem of installation of cadence ic50 in redhat9.

Hi all,
Anybody successfully installed IC5033 on SuSE 9.3? I got error messages during softload uncompressing files. fyi: I installed it in user mode, not in supervisor mode.
unicum