Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

The problem of bond wire in the CST

Status
Not open for further replies.
R

RFbeginner

Junior Member level 3
Junior Member level 3
Joined
Sep 11, 2005
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,449
when analyzing the coupling between transmission lines on the CMOS, I used the bondwire as the output link offerd by CST, but I found that there's little output, could you help everybody analyz the reason? and how to set the groundf for the CMOS?
attached files:
1. currnet distribution in the CST
2. schematic fig with the CST
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top