time_search
Junior Member level 3
good day...i have constructed the 3-level diode clamped inverter on Pspice and i got the THD of it...then when i put the Vpulse i have the THD increased 1%!!!!!...is that ok...i think it shouldnt increase ...actually i think it should decrease...so is it the location of Vplulse is not ok or the parameters of it?...knowing i used: v1=0,v2=5,Td=0,Tr=10u,Tf=10u,Pw=0.07m,Per=0.14m......any help?...thanx...
note: the THD i talked about was for the voltage, but actually for the current THD it is decreased after applying Vpulse cus it was 20% and became 18% after applying Vpulse for the same load(R=1K and L=1.837H) i mean P.F=30...
note: the THD i talked about was for the voltage, but actually for the current THD it is decreased after applying Vpulse cus it was 20% and became 18% after applying Vpulse for the same load(R=1K and L=1.837H) i mean P.F=30...