Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Testing of SMPS power supplies in Laboratory using phantom load

Status
Not open for further replies.
V

vimalkhanna

Full Member level 6
Full Member level 6
Joined
Aug 7, 2010
Messages
322
Helped
55
Reputation
110
Reaction score
53
Trophy points
1,308
Location
delhi
Activity points
3,224
Need to test out SMPS supplies with a phantom load ranging from 100watt to 5kilowatts.
Voltages at output are 12V/24V/48VDC only with current limits going to 100Amps .
 

ah ok, an electronic load. yes you can used 2 electronic load to have a 100A.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top