in the datasheet all the specifications are given.
--> connect supply
--> connect input signals
--> connect a load or a real FET
--> connect all other, if needed (capacitors, bootstrap circuit...)
--> measure the output signal
decide if the output signal is within specification.
In case we connect the output to the IGBT instead of a small impedance load. Is it a must that the IGBT shall be loaded?
Moreover, Can you help me to find a document to best choose the rating of the components (capacitors, resistors, diods, etc..) as we are trying to control the following IGBT IRG4PH50UD.