Test points in ML605 Vertex 6 Board

sriharsha.hs · Jul 26, 2013

Hi folks,

I am using ML605 (Vertex 6) Evaluation kit. I want to test my design output in oscilloscope. So, I am not finding any test points in the board.
I went through the data sheet and getting started guide related to ML605. But I am not finding any info regrading the same.

Please, can you guys guide me.

Thank you.

aruipksni · Jul 26, 2013

sriharsha.hs said:
Hi folks,

I am using ML605 (Vertex 6) Evaluation kit. I want to test my design output in oscilloscope. So, I am not finding any test points in the board.
I went through the data sheet and getting started guide related to ML605. But I am not finding any info regrading the same.

Please, can you guys guide me.

Thank you.

time has changed. you will need to put it to the FMC connector, or find a jumper connected to io pin , that is not used.

sriharsha.hs · Aug 7, 2013

aruipksni said:
time has changed. you will need to put it to the FMC connector, or find a jumper connected to io pin , that is not used.

Hi aruipksni,

Thanks for the reply. I directed all my signal outputs to DIP switches present on ML605.

Test points in ML605 Vertex 6 Board

sriharsha.hs

Junior Member level 3

aruipksni

Full Member level 6

sriharsha.hs

sriharsha.hs

Junior Member level 3

Similar threads

Test points in ML605 Vertex 6 Board

sriharsha.hs

Junior Member level 3

aruipksni

Full Member level 6

sriharsha.hs

Junior Member level 3

Similar threads

Privacy & Transparency

Privacy & Transparency