Test points in a PCB

Status
Not open for further replies.
D

dolgaleb

Member level 2
Joined
Nov 9, 2008
Messages
42
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,288
Activity points
1,679
I want to add test points to a transceiver board that operates in the Ku band. I want to be able to follow the RF path and also check the control and power signals on the PCB. Where should I place the test points and how do I implement them in such a way that they do not disturb the RF path? Also, what are my options for control lines and power signals so that I can probe with an oscilloscope and/or multimeter.
 

Sort by date Sort by votes
Once you connect a scope, meter, etc., you’ve upset the RF path. I would not recommend test points, per se, in the RF path, just use component terminals or bare traces.

For slower power and control lines you can just use vias or install actual test points.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…