Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Test board for Attiny2313 and Atmega16/32

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


The main objectives:
  • LCD display 2x16
  • RS-232 port on the board
  • DC power jack (not ARK)
  • Kanada connector (not strip of HEADERs in a row)
  • Attiny2313 and a bigger Atmega16/32
  • keypad 4x4
  • 5 keys connected to the mass
  • diode or diodes RGB
  • 7-segment display (not covered by LCD)
Additives in separate modules are: slot reader for SD cards and the display LS020 from Siemens CX65.
Photos:



Link to original thread (attachment) – Płytka testowa by Krychol rc na ATtiny2313 i ATmega16/32
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top