Terminal Block on proteus Library

Status
Not open for further replies.
G

Gaber Mohamed Boraey

Full Member level 4
Joined
Feb 26, 2015
Messages
237
Helped
4
Reputation
10
Reaction score
11
Trophy points
1,298
Activity points
2,917
hello everybody,

just a simple question, is this terminal block exist at the proteus v8.5 software?, as i have looked and only found fewer pins terminal blocks, such as 12 pins, and what i need is 25 pins,

it's a screw terminal block, but what i have found doesn't have screws but only virtual shape,

hoe anyone here help with this simple questions,
and thanks for all in advance

here is the terminal block link, i am talking about the green terminals,

https://www.aliexpress.com/item/IDC...lay-terminal-station-DIN-Rail/2043601916.html

waiting your response

- - - Updated - - -

hello any help?
 

Do you expect all PCB software to have every single part that is available in the world - within it's libraries?
I do not, you should not either.

This is such a simple part that you should have very little problem in making your own footprint for it.
Learn how to make symbols, components and parts, then you will not need to post like this because by the time you have finished writing the post you could have finished the whole part
 

Hi,

It is not a single 25 pin terminal block on the picture.
It is a 7 pin block and two 9 pin blocks.

Indeed it´s on you what pin_count_configuration you use. Maybe 5 x 5 pins...

Klaus
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…