kumarpg
Newbie level 1
- Joined
- Oct 14, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 7
Hi All,
I have done ARP and UDP protocol in genesys virtex 5 kit. For the ARP request I'm getting reply from the PC. In TCP protocol, I din't get the ACK from the PC. I have tried the both ways Receive and Transmit, But PC din't respond. How to solve this problem? My question is How to get an ACK from the PC for TCP protocol.
You can see the Wire shark image in the below link.
https://obrazki.elektroda.pl/2846211500_1413264105.jpg
Thanks
Kumar P G
I have done ARP and UDP protocol in genesys virtex 5 kit. For the ARP request I'm getting reply from the PC. In TCP protocol, I din't get the ACK from the PC. I have tried the both ways Receive and Transmit, But PC din't respond. How to solve this problem? My question is How to get an ACK from the PC for TCP protocol.
You can see the Wire shark image in the below link.
https://obrazki.elektroda.pl/2846211500_1413264105.jpg
Thanks
Kumar P G