jivalaraza
Newbie level 1
- Joined
- Oct 26, 2013
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 8
Hello all,
I'm trying to design a reversible circuit and calculate its area, power and delay on different standard cell libraries (like 135nm, 90n, 65nm, 45nm, 25nm etc). I'm new to Tanner EDA and have seen people doing it. I've gone through different links people have provided time to time but most of those links are not available now. As a fresher into this EDA system I'm in the middle of nowhere and now asking for your help. It'd be great if you provide me a heads up to this technology. Thanks in advance.
Nafiul
I'm trying to design a reversible circuit and calculate its area, power and delay on different standard cell libraries (like 135nm, 90n, 65nm, 45nm, 25nm etc). I'm new to Tanner EDA and have seen people doing it. I've gone through different links people have provided time to time but most of those links are not available now. As a fresher into this EDA system I'm in the middle of nowhere and now asking for your help. It'd be great if you provide me a heads up to this technology. Thanks in advance.
Nafiul