T290i Pinouts needed for interfacing with PC

[israr]

Hi
I have connected sonyericsson T68i and K700i to PC through Hyperterminal using serial datacable, These both respond to AT commands, but when i connect T290i it dont respond to AT commands. any one know the reason ???
what are the pinouts of T290i ???

Thanks

 

[halee awan]

Hi
I have connected sonyericsson T68i and K700i to PC through Hyperterminal using serial datacable, These both respond to AT commands, but when i connect T290i it dont respond to AT commands. any one know the reason ???
what are the pinouts of T290i ???

Thanks

Hello visit this Web page
**broken link removed**

 

[israr]

Thanks for ur reply, T290i is still missing there.

 

[halee awan]

Thanks for ur reply, T290i is still missing there.

ok look this link may be it will be there
https://www.edaboard.com/threads/82989/

 

[jaa]

Hello isar,
I was just googling for for pinouts myself. In case You didn't find anything of value I would like to share what I found. If You look at page nine You can read pin outs for the connector on handset and it says: pin8=DTMS pin9=DFMF which means rx resp tx lines. Surprisingly, as You I've looked at pinouts.ru, and found other 11pin connectors pin outs. For instant T100 has pin4=DTMS pin5=DFMF according to pinouts.ru. None of these isn't veryfied by myself. Let me know if this info was usable.
**broken link removed**
Have fun /jaa

 

[israrulhaq]

yeah thanks , i will check it..