Switching regulator for 24Vdc to 5Vdc at 2Amps

Status
Not open for further replies.
T

techie

Advanced Member level 3
Joined
Feb 5, 2002
Messages
839
Helped
58
Reputation
116
Reaction score
9
Trophy points
1,298
Location
Pakistan
Activity points
7,805
What is the most suitable switching regulator for 24Vdc to 5Vdc @ 2Amps. Isolation is not required, regulation can be +/- 10%. Ripple is also not a problem.
 

ap1501

The MAX 724 is a good choice!

Ante :roll:
 

Re: 24vDC to 5vDC @2A

is there a situation that transistor(power) in LM2576 become short circuit and inputs goes to output directly(overvoltage?

Where can I find Overvoltage circuit?
 

Re: 24vDC to 5vDC @2A

Make a search for “crowbar circuit” and you will find what you need!

Ante :roll:
 

Re: 24vDC to 5vDC @2A

anwser
Texas Instruments 3pin ppower modules
vin max 28v vout 5v 2 amps

PT78HT205H

**broken link removed**

these are samnle'able

/Kyndal
 

Re: 24vDC to 5vDC @2A

Look at the AP1501 from Anachip....very low cost and easy to work with.

VIN up to 24VDC in and Vout down to 1.2 VDC

www.anachip.com

Enjoy.....
 

Re: 24vDC to 5vDC @2A

Use SI-8050S

FEATURE

- Compact full-mold package (equivalent to TO220)
- Output current : 3.0A
- High efficiency: 79 to 91%
- Reqsuires only 4 external components
- Phase correction and output voltage adjustment performed internally
- Built-in rreference oscillator (60kHz)
- Built-in overcurrentand thermal protection circuits
- Built-in soft start circuit(output ON/OFF control)
 

Re: 24vDC to 5vDC @2A

Look at h**p://www.micrel.com/

The MIC4684 is a high-efficiency 200kHz stepdown (buck) switching regulator. Power conversion efficiency of above 85% is easily obtainable for a wide variety of applications. The MIC4684 achieves 2A of continuous current in an 8-lead SO (small outline) package at 60°C ambient temperature.

JURS
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…