Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Sun Sensor

Status
Not open for further replies.

Berend Kunze

Newbie level 6
Newbie level 6
Joined
Feb 13, 2023
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
56
Hello.
We are trying to measure the position of the sun even on a cloudy day.
Of course there are sensors like:
-GPS,
-Light sensor
- rain and slow sensor
-Wind sensor
-Temperature sensor
- GPS
-Angle sensor
- Limitation sensor
We are trying to use these to measure the position of the sun.
How to design the system, and most importantly, how to measure the position of the fetus using a light sensor?
I hope you help.
We will discuss more specific issues in the future.
thank you.
 

If you can't see the Sun or distinguish it from the background sky, there is no way to measure its position. You can easily calculate it though, use GPS to find your location and NTP to find the exact time then run a calculation to find its elevation and direction.

Brian.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top