gres
Full Member level 4
I wanted to make subwoofer that want be just a box in the middle of the room, but it still should play nice...
I have had 2 GDN 25/60 so decided to check how "tandem" system works.
For today it's just "naked" pack, I'm goint to buy a few elements like filter, and power amp.
Testing I made thanks to friend that lent me his filter. I started with 80W from house amplifier and must say that it's nice surprise. Main application is music, movies rare. I tried with diffrent music style and no where i found bad bass even with hard style.
It has made on 16 boards and seal by wikol glue.
Capacity is 45l and 42Hz tuning.
I wanted to finish it with veneer but after realized costs i chose material ( I have dressmaker at home ). Ofcourse if you smoked material would smell, the same with kitchen smells.
"legs" are made by my father who lathe and paint them.
Main datum point was this project but with different converters + helpful diagrams from WinISD
Top cover is hasn't screwed on yet, because tomorrow i will get filter. You can see connection line, but after tighten it will disappear.
While testing, top cover was blow up so I need to screw it harder.
Original text with more pictures you can find here https://www.elektroda.pl/rtvforum/topic1518515.html
