OnTilt
Newbie level 2
- Joined
- Feb 24, 2014
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 19
Hi guys!
I want to create a cylindrical ring in HFSS.
I do it in this way:
First, I create an outer cylinder
After I create an inner cylinder
So I subtract the second from the first cylinder. (No clone)
I wonder if there is an option after the subtractrion to make these to cylinders to act line a uniform cylinder. My purpose is to build a cylindrical disk with many holes on it. I will do it with the method explained above. But I want this cylindrical disk to act like a unique cylinder.
I want to create a cylindrical ring in HFSS.
I do it in this way:
First, I create an outer cylinder
After I create an inner cylinder
So I subtract the second from the first cylinder. (No clone)
I wonder if there is an option after the subtractrion to make these to cylinders to act line a uniform cylinder. My purpose is to build a cylindrical disk with many holes on it. I will do it with the method explained above. But I want this cylindrical disk to act like a unique cylinder.