Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Stuck on a capacitor project.

Status
Not open for further replies.

Caramine

Newbie level 2
Newbie level 2
Joined
Nov 18, 2007
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,294
Is it possible to build a solid state electrolitic capacitor switch which when finished will invert the output of the cap. + / - using Junction Fet, Mosfet, SCR, or Triac's?
 

I'm working on a inverter project in which I will connect capacitors in parrallel to charge at 24VDC then switch them in series to discharge at 150DC then the output poles are inversed at 60Hz

Added after 44 minutes:

I checked the web for DC solid state relays, They are around $65 each. Is there any site that would have a circuit example for a solid state DC relay?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top