STM32F103 Uploading error on Arduino IDE

[johnny78]

hello Guys

i have got a new board STM32F103C8T6 Which named Blue Pill
i did all the instructions for uplading a program on it using usb to serial adapter but
Arduino IDE give me errors

Sketch uses 12648 bytes (19%) of program storage space. Maximum is 65536 bytes.
Global variables use 2456 bytes (11%) of dynamic memory, leaving 18024 bytes for local variables. Maximum is 20480 bytes.
C:\Users\janos\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2019.3.31/win/serial_upload.bat COM8 {upload.altID} {upload.usbID} C:\Users\janos\AppData\Local\Temp\arduino_build_881071/Blink.ino.bin
Failed to init device.
stm32flash 0.4

http://stm32flash.googlecode.com/

Using Parser : Raw BINARY
Interface serial_w32: 115200 8E1

any help will be great

Thanks

Johnny

 

[baileychic]

Have you tried these methods?

http://idyl.io/arduino/how-to/program-stm32-blue-pill-stm32f103c8t6/

http://www.youtube.com/watch?reload=9&v=KgR3uM21y7o

http://github.com/rogerclarkmelbour...-a-generic-"ST-Link-V2"-programmer-from-Linux

 

[johnny78]

Have you tried these methods?

http://idyl.io/arduino/how-to/program-stm32-blue-pill-stm32f103c8t6/

http://www.youtube.com/watch?reload=9&v=KgR3uM21y7o

http://github.com/rogerclarkmelbour...-a-generic-"ST-Link-V2"-programmer-from-Linux

thanks
i will try it tonight But i have tried the stm32duino instructions & the circuit digest example

- - - Updated - - -

thanks
i will try it tonight But i have tried the stm32duino instructions & the circuit digest example

i want to program it using usb to serial adapter & arduino IDE Not St link