mekitron
Junior Member level 3
- Joined
- Dec 6, 2012
- Messages
- 31
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,296
- Location
- Mehran Valley
- Activity points
- 1,514
Hello All,
I am practicing on STM32 development board these days. I have written a piece of code which prints some lines on LCD connected with board. Board has ARM Cortex M3 Processor. Now, I want that what code I coded should blink on LCD. I know it is possible with timer programming but I can't find any solution. I am posting my code if you have some code like this please share with some explanation or help me that how I can do this.
I'll be thankful for your help in this concern.
Regards,
Meki
I am practicing on STM32 development board these days. I have written a piece of code which prints some lines on LCD connected with board. Board has ARM Cortex M3 Processor. Now, I want that what code I coded should blink on LCD. I know it is possible with timer programming but I can't find any solution. I am posting my code if you have some code like this please share with some explanation or help me that how I can do this.
Code:
#include <stm32f10x_lib.h>
#include "sys.h"
#include "usart.h"
#include "delay.h"
#include "led.h"
#include "key.h"
#include "exti.h"
#include "wdg.h"
#include "timer.h"
#include "lcd.h"
int main(void)
{
u8 x=0;
Stm32_Clock_Init(9);
delay_init(72);
uart_init(72,9600);
LED_Init();
LCD_Init();
POINT_COLOR=RED;
while(1)
{
POINT_COLOR=RED;
LCD_ShowString(30,50,"Mini STM32 Program ^_^");
LCD_ShowString(30,70,"It's Meki");
LCD_ShowString(30,90,"Help Me to blink these lines");
LCD_ShowString(30,110,"Thank you");
x++;
if(x==12)x=0;
LED0=!LED0;
delay_ms(5000);
}
}I'll be thankful for your help in this concern.
Regards,
Meki
Last edited: