Steps for programming PIC 16f877

[prabesh]

hello everyone please explain how to program PIC and i need a simple programmer for it.

 

[sanjubluerock3]

u need to build a pic programmer first i am attaching the db9 pic programmer circuit and even the pcb art work

 

[jamshid.dastur]

You may follow
**broken link removed**

as a starter guide to pic programming.

Best Regards
Jamshid

 

[numa]

To get started, you need the following.

1. Compiler/assembler, MPLAB should do fine here. If you need C compiler download hitech C light from https://www.htsoft.com/

2. A development board or a basic circuitry wired on breadboard. You could buy an off the shelf development board also.
Find one here **broken link removed**

3. An ICSP programmer. You can buy it or make on your own. If you want to make one, find the schematics and software below.
**broken link removed**g
https://www.winpic800.com//index.php?option=com_content&task=blogcategory&id=18&Itemid=64

If you are planning to do some serious development with PIC, I strongly suggest buying a Pickit3 debugger from www.microchipdirect.com.

Hope this helps.

 

[twits]

I have just recently built the USBPICPROG. I can recommed it.