Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

statisitcs calculation

Status
Not open for further replies.

alqasim

Advanced Member level 4
Full Member level 1
Joined
May 5, 2005
Messages
109
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,296
Location
Saudi Arabia
Activity points
1,936
if i have - on hourly basis - three measurements ( Max - Min - Avg ) , what are the parameters that i can conclude from ?

Min Avg Max
-65 -52.8 -49
-64 -52.5 -48
-65 -52 -49
-64 -51 -48
-60 -52 -49
-62 -53 -49
-62 -51.5 -48
-62 -51.2 -48
-62 -51.8 -48
-65 -52.8 -48
-66 -52.2 -48
-62 -52.5 -48
-62 -52.5 -49
-63 -51.8 -48
-60 -51.5 -48
-61 -50.8 -48
-56 -49.8 -47
-60 -51.8 -47
-63 -51.8 -48
 

I can see the mean value given by (max+min)/2 is always lower than the measured average; f.i. the first row is (-65-49)/2=-57 that is lower than 52.8. Supposing the sampling to get max/min and avg is the same, then the actual values are closer to the maximum rather than the minimum
 

Statistics is the study of the collection, organization, analysis, interpretation, and presentation of data.It deals with all aspects of this, including the planning of data collection in terms of the design of surveys and experiments.
**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top