standard cell layout

Status
Not open for further replies.
Y

Yathin P U

Junior Member level 3
Joined
Oct 11, 2012
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,447
hi,

Explain some of the techniques to create std. cell layout without any jogs in poly, metal routings etc.
 

Yathin P U said:
hi,

Explain some of the techniques to create std. cell layout without any jogs in poly, metal routings etc.
Click to expand...


To create std cells following points are important
1) design the std cell layout within as less area as possible, because std cells are repreated, their area should be optimum
2) To avoid metal jogs, calculate the via size and overhang. With the obtained thickness value route the metal\
3) Place the pins as nearer to boundary as possibl to make them easily accessible
4) Avoid poly routing.
 

Adding to starinspace's message:
You have to first check the routing, pitch(Metal-M, M-V and V-Via).

For any thing , first you have to design a Layout and then you will know the trade off to design.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…